Home | About Fylde | Applications | Products | Data Sheets | Contact Us | Search

Micro Analog 2 - FE-MM16

MA2 menu itemFEMM40 menu itemFEMM16 menu itemFEMM8 menu itemUSBFEMA3240 menu itemModules menu itemUSB

The FE-MM16 is a DC powered 16 channel version of its larger brother the FE-MA32/40. Like all chassis styles in the Micro Analog 2 range, it accepts a range of dual channel signal conditioning modules which together cover almost every transducer type. There are slots for up to 8 dual channel modules. An additional slot is reserved for the optional FE-366-AZ auto zero module which controls the automatic offset removal for FE-366-TA bridge transducer amplifiers. Inputs are via the 7 pin rear panel connectors which can accept a variety of connector adaptors and outputs are via 15 way D connectors which accept the FE-MAC8C BNC adpator.

This system may also be used with the USB interface by inserting the FE-357-USB interface module.

The front panel drops down to allow any of the Micro Analog 2 modules to be inserted into any position. Configuration and operation is simple, and the rear panel connector may be connected to one or two 8 way BNC adaptors or connected using an adaptor to any data acquisition system.

FE-MA32 Front OpenFE-MM16 system

8 input connectors (one for each pair of channels) are shown in the rear panel illustration.

FE-MM16 system rear panel

The front panel drops down to reveal the signal conditioning modules.

FE-MM16 system with panel down


Load Cells, Pressure Transducers, Strain Gauges, DCLVDTs, Potentiometers, all forms of bridge type transducers and DC voltage signals, Accelerometers, Hydrophones, ICP® transducers and AC voltage signals, Thermocouples, Frequency Pickups. Mix and Match cards as required.

System Specification

Maximum 16 channel analogue instrumentation system in 2U enclosure. System can be supplied with rack mounting ears or front panel handles.

Up to 8 dual channel cards in any combination plus optional Auto-Zero card.

10 to 36 V DC supply (Max current 1 A).

Inputs 8 x 7 pin Tuchel. Output 2 x 15 way D sockets. Adaptors available for both input and output connectors.

Dimensions 100(H) x 225(W) x 375(D)

Environment 0°C to 40°C, 0 to 80 % R.H. non condensing.


This page is maintained by Fylde Electronic Laboratories Ltd.