Home | About Fylde | Applications | Products | Data Sheets | Contact Us | Search
Vehicle and other mobile applications often demand that the instrumentation be able to be powered by the vehicle's electrical system and may also require smaller instrumentation blocks for best use of space. This system houses four Micro Analog 2 modules for eight channels of signal conditioning together with the optional Auto-Zero in a small but tough machined plastic chassis. The rear panel carries the same screw lock connectors as the other systems in the range. The output connector is a 15 way D type. Front panel indicators denote power "ON" (flashes when overloaded) and Auto Zero in progress.
This system may also be used with the USB interface by inserting the FE-356-USB interface module.
Load Cells, Pressure Transducers, Strain Gauges, DCLVDTs, Potentiometers, all forms of bridge type transducers and DC voltage signals, Accelerometers, Hydrophones, ICP® transducers and AC voltage signals, Thermocouples, Frequency Pickups. Mix and Match cards as required.
Maximum 8 channel analogue instrumentation system in DC powered enclosure.
Up to 4 dual channel cards in any combination plus optional Auto-Zero card.
Input Power : < 10 V D.C. to > 36 V DC . (90 VAC to 250 VAC operation using a standard mains to DC adaptor).
Inputs 4 x 7 pin Tuchel. Output 15 way D socket. Adaptors available for both input and output connectors.
Dimensions 74(H) x 110(W) x 228(D) 0°C to 40°C, 0 to 80 % R.H. non condensing.
Finish : Textured Cream in 4 mm Machined Plastic.
This page is maintained by Fylde Electronic Laboratories Ltd.